Made from High-quality premium grade vinyl, this great new Bailey Ranger 620/6 Decal with Bubbles N/S is ideal for refreshing the look of your caravan.
Sized to match manufacturers originals at an overall 560mm
Made from high-quality vinyl, all our caravan decals are laminated for extra protection free of charge.
Series 5 Ranger 620/6 Decal with Bubbles N/S Replacement Sticker - Made from High quality premium grade vinyl, this great new near side Bailey Ranger Caravan vinyl graphic is ideal for refreshing the look of your caravan. Sized to meet manufacturers originals. All Graphics Come sandwiched between backing paper and application tape. We have hundreds of different designs and can re-size graphics if required. We can also reproduce most graphics from a good quality photograph. Please contact us for further information and pricing.
We specialise in making REPRODUCTION/AFTERMARKET/NON-OEM caravan and motorhome stickers, decals and graphics, where, in most cases, the originals are no longer available. We may not create the exact designs, however, we draw all our graphics ourselves to as close as we can get to the originals. This combined with only using premium-grade vinyl allows for the best graphics possible to enhance your vehicle. We do not claim to produce a perfect match for these caravans due to the lack of existing artwork, but we have a great reputation for doing our very best for our growing list of customers. All our stickers are re-drawn to produce clean, sharp cut lines which in turn leads to high-quality decals. Some take longer to produce due to the complexity, but in most cases, our turnaround is excellent.
Professional Grade - Comes sandwiched between a backing sheet and an application tape, Full fitting instructions will be provided, Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material, Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material.